Other listings by this author |
|
 MITCalc3D for Autodesk Inventor 1.61 (Downloads: 392)
Mechanical, Industrial and Technical Calculations for Autodesk Inventor MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will
reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a
technical problem, or a calculation of an engineering point without any significant need for expert knowledge.
MITCalc contains both design and check calculations of many common tasks, such as: spur and bevel gear, b...
|
|
 MITCalc Springs 15 types 1.17 (Downloads: 1235)
Geometrical design and strength check of 15 springs types The calculation is to be used for geometrical and strength design of metal springs of various types and designs, subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
1) Geometrical design and calculation of working cycle parameters for metal springs of the following types and
designs:
- Helical cylindrical compression springs of round...
|
|
 MITCalc Tolerance analysis 1.19 (Downloads: 1190)
Tolerance analysis of linear, 2D and 3D dimensional chains Two programs for the tolerance analysis of linear, 2D and 3D dimensional chains
1) Tolerance analysis of linear dimensional chains.
The program is designed for tolerance analysis of linear (1D) dimensional chains. The program solves the following
problems:
- Tolerance analysis, synthesis and optimization of a dimensional chain using the arithmetic "WC" (Worst case) method, possibly the statistical "RSS" (Root Sum Square...
|
|
 MITCalc Plates design and calculation 1.15 (Downloads: 1259)
Deflection, stress and variation of forces in the loaded flat plates This calculation deals with the deflection, stress and variation of forces in the loaded flat plates. The calculation is designed for plates that are flat, homogeneous, with the same thickness and made from one material. The plates may be circular, annular circular and rectangular. The plates may be loaded evenly (unevenly) on the whole surface (or its part) or they may be loaded by the force distributed on the circle. The programme enables:
- Selection from c...
|
|
 MITCalc V-Belts Calculation 1.22 (Downloads: 1218)
Geometric design and strength check of V-belt transmission The calculation is designed for a geometrical design and strength check of belt transmissions using V-belts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Calculation for 2 or 3 pulleys.
- Automatic design of a transmission with the minimum of input requirements.
- Design and calculation of geometrical parameters (diameters of pulleys, axis distances, length of the...
|
|
 MITCalc Straight beams calculation 1.21 (Downloads: 1482)
Calculations of the straight beams with constant cross section. The application is designed for calculations of straight, maximum three times static indefinite beams with constant axis-symmetrical profiles. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Simple definition of the type of beam and its loading with visual check.
- Calculation of area characteristics of 20 types of cross sections.
- Calculation of reactions in supp...
|
|
 MITCalc Shells 1.13 (Downloads: 1011)
Shells - Deformation and stress of rotational shells The calculation concerns solutions of pressure vessels and their components. The calculation solves deformations and curves of stress in rotational shells loaded with axial force, pressure, radial force and a bending moment. This program is intended for homogeneous shells of identical thickness and a single material. The calculation also enables solutions for connecting two shells of different parameters (thickness, material, dimensions...).
The program enable...
|
|
 MITCalc Roller Chains Calculation 1.21 (Downloads: 1230)
Design and strength check of roller chain transmission The calculation is designed for a geometrical design and strength check of common chain transmissions using roller
chains. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the
following tasks:
- Selection of a power suitable type of chain.
- Selection of an optimum transmission alternative regarding power, geometry and weight.
- Calculation of geometric, strength, safety and oper...
|
|
 MITCalc Worm Gear Calculation 1.18 (Downloads: 1286)
Geometric design and strength check of worm gear Geometric design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of gearing dimensions.
- Automatic transmission design with minimum input requirements.
- Design for safety coefficients entered.
- Calculation of a table of proper solutions.
- Calculation of complete geometrical parameters.
- Calcu...
|
|
 MITCalc Profiles Calculation 1.20 (Downloads: 1288)
Area characteristic of profiles and mass characteristic of solids The calculation solves area characteristics of profiles created in a simple graphic editor and mass characteristics of solids created by extrusion or rotation of the profile. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following tasks:
- Creation of a profile in a simple graphic editor.
- Calculation of area characteristics (Ix, Sx) for main axes passing through the centre of gravity.
...
|
|
 MITCalc Planet Gear Calculation 1.17 (Downloads: 1181)
Geometric design and strength check of planet gear (straight and helical) Geometric design and strength check of planetary gearing with straight and helical toothing. Application is developed in MS
Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of helical and straight toothing.
- Automatic design of a transmission with the minimum number of input requirements.
- Design for entered coefficients of safety (static, dynamic).
- Calculation of...
|
|
 MITCalc Pinned couplings 1.19 (Downloads: 1639)
Geometric design and strength check of couplings using pins and clevis pins The calculation is intended for the geometric design and strength check of couplings using pins and clevis pins. The program is used to solve the following tasks:
- Design of pin for spring attachment.
- Design of couplings with securing pins.
- Design of cross pin in rod and sleeve.
- Design of radial pin for shaft-hub connection.
- Design of longitudinal pin for shaft-hub connection.
- Design of clevis pin for rotating rod-clev...
|
|
 MITCalc Shaft connection 1.23 (Downloads: 1321)
Designs and strength checks of shaped connections of shafts with hubs The calculation is designed for geometric designs and strength checks of shaped couplings of shafts with hubs. The application provides solutions for the following tasks:
- Design of a coupling with parallel side keys.
- Design of a coupling with Woodruff's keys.
- Design of a coupling with straight-sided splines.
- Design of a coupling with involute splines.
- Strength check of designed couplings.
- The application includes a ta...
|
|
 MITCalc Shafts Calculation 1.24 (Downloads: 1217)
Geometrical design and complex strength check of shafts The calculation is designed for geometrical design and complex strength check of shafts.
Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following
main tasks:
- Simple definition of installed shafts, including hollow ones.
- Options of definitions of necking-down, recesses, grooves and calculation of the relevant coefficients of stress concentration.
- Simple definition of s...
|
|
 MITCalc Tension Springs 1.22 (Downloads: 1451)
Geometric and strength designs of helical tension cylindrical springs The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, loaded with static loading. . Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks:
- Automatic design of the spring.
- Selection of an optimal alternative of the spring design in view of strength, geometry and weight.
|
|
 MITCalc Internal Spur Gear Calculation 1.21 (Downloads: 1223)
Geometric design and strength check of internal spur gear (straight and helical) Geometric design and strength check of internal spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of helical and straight toothing.
- Automatic design of a transmission with the minimum number of input requirements.
- Design for entered coefficients of safety (static, dynamic).
- Calculation of compl...
|
|
 MITCalc Spur Gear Calculation 1.24 (Downloads: 1202)
Geometric design and strength check of spur gear (straight and helical) Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS
Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:
- Calculation of helical and straight toothing.
- Automatic design of a transmission with the minimum number of input requirements.
- Design for entered coefficients of safety (static, dynamic).
- Calculation of complet...
|
AbleFTP 11.10: AbleFtp - FTP client designed to automate and run 1000+ FTP tasks a day.
JaSFtp 11.10: JaSFtp - Automated SFTP client (secure FTP), Run 1000+ tasks on a schedule.
TradeTrakker 2.93: Powerful investment tracking program to automatically track stocks/mutual funds
Domain Quester Pro 6.02: Search for domains by unlimited number of keywords